Slag Vertical Roller Mill
1.High efficiency grinding, high drying capability, low energy consumption, low noise, little dust and mainly used for slag grinding of metallurgy and cement industry.
2.Adopt advanced separating technology to increase separating efficiency which can save 15% energy than common separator. Avoid excessive grinding and also can easily adjust the slag fineness according to the market requirement.
3.The mill adopt central feeding type by which the material can be centre vertical feed in to the mill. Meanwhile, the recycle material and new material are feed separately to avoid material block and increase operating efficiency.
4.Particular swing lever can increase anti-impact capability effectively to assure the stability and safety during frequently impulse load operation.
5.Adopt flat mill table and cone roller to make the linear velocity tend to be equal inside and outside the mill which can reduce uneven wear to lengthen the roller cover.
6.The main roller + auxiliary roller is 2+2/3+3 type. The auxiliary roller distributes the material to press the material layer and exhaust air which can bring the material layer to solid material bed. Supported by hydraulic system, the main roller grind the material bed with high pressure. This type of configuration can greatly satisfy grinding efficiency in high specific surface area.
Specification and Technical Parameter
|Type||Diameter of Mill Table||Rotating Speed of Mill Table||Motor Power||Roller Quantity||Specific Surface Area||System Capacity||Production Line Capacity|
|JLMK-35.2.2X.00||3500mm||28.5 r/min||1600KW||2+2||4200-4500 cm2/g||45t/h||300000 ton slag/year|
|JLMK1-46.2.2X.00||4600mm||26.318 r/min||3000KW||2+2||4200-4500 cm2/g||90t/h||600000 ton slag/year|
|JLMK1-46.2.2X.00||4600mm||26.318 r/min||3150KW||2+2||4200-4500 cm2/g||90t/h||600000 ton slag/year|
|JLMK-56.3.3X.00A||5600mm||22 r/min||5400KW||3+3||4200-4500 cm2/g||160t/h||1000000 ton slag/year|